This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Using SN65LVPE502 with USB 2.0

Other Parts Discussed in Thread: SN65LVPE502

Hello Experts,

I am curious if i can use the SN65LVPE502 to redrive a USB2.0 signal.  I am looking at using the USB2.0 Phy on the OMAPL137 and I would like to run it to the other side of the board and through a cable, which could be a long distance.  I would like to add a redriver to make sure I have a good signal.  Can I use this device for this function?