SN65LVPE502A / host side and device side

K.Yaita

Guru 29710 points

Other Parts Discussed in Thread: SN65LVPE502A

Hi Team,

I'd like to ask about SN65LVPE502A.

In datasheet P.9, There is following description.

It seems Device_xx pin can't connect to USB3.0 host side and Host_xx can't connect to USB3.0 device side.

Is there any difference between channel A(Receiver / Driver) and channel B(Receiver / Driver)?

Best Regards,

Yaita / Japan disty

over 10 years ago

0 Diego Cortes over 10 years ago

TI__Mastermind 36085 points

Hello Yaita-san,

Yes, there are slight differences between both channels and they were optimized to work as is indicated on the datasheet. If the customer wants to connect it at the inverse I suggest to use the B part (SN65LVPE502B)

Best regards,

Diego.

0 K.Yaita over 10 years ago in reply to Diego Cortes

Guru 29710 points

Hello Diego-san,

Thank you for your quick relpy.

I understood.

Best Regards,

Yaita

Interface

Interface forum

SN65LVPE502A / host side and device side