SN65LVDS302 – About SWAP pin

Hide

Guru 21045 points

Hi Team,

My customer would like to connect the SWAP pin to VDD=1.8V.

In this case, must they connect the pull up resistor?

If yes, Could you please let us know the recommended value?

Regards,

Kanemaru

0 Diego Cortes over 9 years ago

Hello,

The pull up resistor is not necessary, the customer can directly connect the SWAP pin to VDD

Best regards,

Diego..

0 Hide over 9 years ago in reply to Diego Cortes

Guru 21045 points

Hi Diego-san,

Thank you for the information.

I understood. thank you very much.

Regards,

Kanemaru

Interface forum