Dear All,
I need to use a board that is equipped with the SN65HVD51 RS845 full-duplex transceiver, for the communication with an half duplex device, with minor changes on the board.
I may connect the SN65HVD51 output of the transmitter to his input, by the connection of the 'A' to 'Y' and the 'B' to 'Z'. In terms of software, I may program my micro controller to disable the reception while I am transmitting (eventually I need to add some time delay after the transmission end, before enabling the reception again).
The communication will work properly between my full duplex board with the SN65HVD51 and the half duplex device?
Best regards,
Oscar