• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 536 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD2E001-Q1 / Failure mode caused by EOS

S.Satoshi
Guru 21675 points
Other Parts Discussed in Thread: TPD2E001-Q1

Hi All,

Now our customer has evaluated TPD2E001-Q1 and investigating the failure mode caused by EOS because ESD protection ICs are exposed to outside of system. So that means that there is a possibility of damaging by EOS. Can you confirm the possible failure mode caused by EOS, short mode or open mode?

Your comment will be appreciated.

Best Regards,

Sonoki / Japan Disty