Hello,
For a high speed video display application, I am planning to use TPD8S009 between a LVDS connector and a FPGA. Am I right in saying that Vcc of TPD8S009 should be connected to the supply voltage of the corresponding FPGA bank (where the LVDS signals are routed)?
e.g, LVDS connector ----- > TPD8S009 --------------> Spartan 6LX75, Bank 0
for the above configuration, supply voltage of Bank 0 is 2.5V hence Vcc of TPD8S009 should be 2.5V too
Also, for GND connection, is it okey to connect GND of TPD8S009 directly to system GND? Do I need some kind of extra circuitry there?
Thanks a lot for your help
rifo
