Can the DS91M124 drive a SN65LVDS048?

JOE PADIAS

Other Parts Discussed in Thread: DS91M124

I have a CCA design and need to receive a clock from a DS91M124. I have one gate open on a SN65LVDS048 can I receive the clock with 100 ohm termination?

over 9 years ago

0 Michael Peffers over 9 years ago

TI__Mastermind 20820 points

Hi Joe,

So long as you do not violate any of the absolute max specifications on the SN65LVDS048 you will be fine. Since this is an LVDS part the 100 ohm termination is right in line with what you need. I do not see any problem interfacing the two ICs.

0 JOE PADIAS over 9 years ago in reply to Michael Peffers

Prodigy 90 points

Thanks, Michael

Interface

Interface forum

Can the DS91M124 drive a SN65LVDS048?