DS125DF111EVM Gerbers

Scott Hooper

I would like to use the layout for the DS125DF111EVM as a starting point to see just how high a frequency I can push the device to in conjunction with some robust automotive connectors.
Can you please send me the gerber files for the DS125DF111EVM?

Scott Hooper
GigaTest Labs
Scott@gigatest.com

over 7 years ago

0 Lee Sledjeski over 7 years ago

TI__Mastermind 43795 points

Hi Scott,

I have the Cadence .brd files I can send over, is that okay?

If the automotive connectors are not good at controlling impedance, I would back the DF111 away from the connector a few inches so any reflections have some time to dissipate.

Regards,

Lee

0 Scott Hooper over 7 years ago in reply to Lee Sledjeski

Prodigy 30 points

Lee

Thanks, and YES—Cadence .brd files will be perfect!

Point taken on the automotive connectors. Thanks.

-Scott

Interface

Interface forum

DS125DF111EVM Gerbers