Hello Team,
My customer has found a discrepency in the datasheet and would like clarification. Can you advise on below?
We’re in the middle of coding symbols and have noticed a discrepancy in the TUSB542 datasheet.
Page 8 shows:
Whereas in the table it shows:
Which is correct?
Also can you validate below is a good implementation - any other recommendations w/ resepect to app notes etc.
TUSB321AI – CC Control IC
TUSB542 – USB 3.1 Gen1 5G 2:1 Redriver/Mux
TPS2021 – VBUS power switch / current limit
Below is the customer implementation
Any guidance/app notes would be appreciated. We are not interested in supporting USB-PD. We would like to reuse the existing USB2.0 PHY.
Attached is a simplified block diagram of the implementation
Sincerely,
Dan Nitta Mackay TSR Ottawa Canada