DS100BR210 users manual typo?

Satoshi

Guru 19495 points

Other Parts Discussed in Thread: DS100BR210EVK

About DS100BR210EVK user's manual, please let me check typo or not.

In the User's manual page-11, 7pin and 8pin are output and 23pin and 24pin are input.

Is opposite correct?

Best regards,

Satoshi

over 7 years ago

0 Michael Lu (Santa Clara) over 7 years ago

TI__Mastermind 29635 points

Hi Satoshi-san,

Yes, this is a typo. The inputs and outputs should be labeled in the schematic in the same way they appear in the datasheet. We will work to update the schematic in this document. Apologies for the mistake. We will correct as soon as possible.

Regards,

Michael

0 Michael Lu (Santa Clara) over 7 years ago in reply to Michael Lu (Santa Clara)

TI__Mastermind 29635 points

Hi Satoshi-san,

To close out this thread, the DS100BR210EVK User's Guide has been updated and released on TI.com to correct the typos previously observed in the document.

Regards,

Michael

Interface

Interface forum

DS100BR210 users manual typo?