Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 376 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS30BA101/DS30EA101 ground reference

plenet remi
Prodigy 50 points
Other Parts Discussed in Thread: DS30BA101, DS30EA101

Hi,


I have a SDI signal from a serializer on an electronic board, and a deserializer on an other electronic board.

I plane to use DS30BA101 and DS30EA101, with a twisted pair cable as explane on the datasheet:

Does the ground of the BA101 and ground of EA101 have to be connected together or not?

Thanks.

Regards.

Rémi.