SN75469: Safe Operation Area(SOA) of SN75469

yoshiki hasebe

Mastermind 6385 points

Part Number: SN75469

Dear Sirs,

My customer asked us about Safe Operation Area(SOA) of SN75469.

Q1:Please let me know about SOA (safe operation area).

Q2:Please let me know the values in the table for point A shown in the figure.

Best Regards,

Y.Hasebe

over 7 years ago

0 Ron Michallick over 7 years ago

TI__Guru*** 140106 points

Yoshiki-san,

We will look into your request.

Thank you for your patience.

0 Michael J Schultis over 7 years ago in reply to Ron Michallick

TI__Mastermind 24485 points

Hello Yoshiki-san,

Apologies for the delay through the US holiday season.

Please see the SOA below for the SN75469 device. Does this help to answer your question?

Best,
Michael

0 yoshiki hasebe over 7 years ago in reply to Michael J Schultis

Mastermind 6385 points

Hello Michael-san,

Thank you for you kindly reply.

And I apologize for the late reply by holiday.

I understand answer of Q1.(Please let me know about SOA (safe operation area))

Then, do you know about Q2?(Please let me know the values in the table for point A shown in the figure.)

Best Regards,

Y.Hasebe

0 Michael J Schultis over 7 years ago in reply to yoshiki hasebe

TI__Mastermind 24485 points

Hello Hasebe-san,

The plot shows that the point A is at about 2.8V.

Since the safe operating area is based on a calculation from the thermal limit of the device, we don't have data to support short pulse duration stresses on the device.

It would be my recommendation to stay within the SOA curve regardless of the pulse duration.

Best,
Michael

0 yoshiki hasebe over 7 years ago in reply to Michael J Schultis

Mastermind 6385 points

Hello Michael-san,

Thank you for your reply.

I understand your comments.
I will send your comments to my customer.

Best Regards,
Y.Hasebe

Interface

Interface forum

SN75469: Safe Operation Area(SOA) of SN75469