SN65LVPE502A: EQ setting suggestion

Antony Lin

Genius 13480 points

Part Number: SN65LVPE502A
Other Parts Discussed in Thread: TUSB522P

Hi,

My customer is using SN65LVPE502A with topology as below. What would be the EQ setting suggested here as a start?

Main Board: about 20 inch

Cable: about 1.2m

Daughter Borad: about 2 inch

Thanks!

Antony

over 7 years ago

0 Moises Garcia over 7 years ago

TI__Mastermind 23815 points

Hi Antony,

We no longer recommend LVPE502 or LVPE512, please move to TUSB522p.
I guess TUSB522p will be placed on MB close to the connector.
EQ from MB = 6dB
EQ from DB = 9dB

Regards

0 Antony Lin over 7 years ago in reply to Moises Garcia

TI__Genius 13480 points

Hi Garcia,

I'm persuading customer to use TUSB522 now, but they already have the board back. Do you have a guide regarding how to rework the board from SN65LVPE502A to TUSB522?

Based on the SN65LVPE502A board, their topology is as below and SN65LVPE502A iis placed closed to the connector on MB as below. What would be the EQ setting you suggestied?

MB: about 20 inch

Cable: about 1.2m

Daughter Borad: about 2 inch

Thanks!

Antony

0 Moises Garcia over 7 years ago in reply to Antony Lin

TI__Mastermind 23815 points

Hi Antony,

In TUSB522P product page under technical documents tab, there is an application note SN65LVPE502A to TUSB522P Change Document.

As a starting point they can try:

EQ from MB = 6dB
EQ from DB = 9dB

Regards

Interface

Interface forum

SN65LVPE502A: EQ setting suggestion