TPD13S523: TPD13S523 for 1080p @ 50Hz

Mike,

The capacitance on the TPD4E05U06 is much lower than the TPD13S523 so there isn't as much loss on those lines.

However the TPD13S523 should work in HDMI application. Do you have a schematic you can share?

Regards,
Cameron

Good day Cameron,

I don't have a schematic yet.
My question is: does the TPD13S523 operate with 1080p @ 50Hz?
Datasheet says it supports HDMI 1.4, but this standard supports 720p @ 50Hz or 1080p @ 24Hz
But HDMI 1.4b supports 1080p @ 120 Hz

So the question is if the TPD13S523 supports 1080p @ 50 Hz or not?

Thank you, Mikhail

Mikhail,

1080p at 50Hz is right on the edge of what the TPD13S523 supports.This part was designed before the HDMI 1.4b standard was released and cannot support 1080p at 120Hz.

I cannot guarantee it to work in every system. However if you provide a schematic I might be able to see if there is an issue that can be corrected using this part.

As I said before TPD4E05U06 has much lower capacitance that will handle much higher speeds.

Regards,

Cameron

thank you, Cameron,

Mike