• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 383 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2540: SDP device connection with CDP mode

Hirotaka Inoue
Intellectual 2980 points
Part Number: TPS2540
Other Parts Discussed in Thread: TPS2546

Hi Donovan,

Does TPS2540 with CDP mode behave as SDP mode of 0.5A limit after TPS2540 recognized connected SDP device?

What is defferent from TPS2546 for this behavior?

Before thread:

https://e2e.ti.com/support/interface/usb/f/1008/t/638780

Regards, Hirotaka Inoue

  • 0
    TI__Intellectual 1890 points

    Hi Hirotaka,

    No.  The TPS2540 stays in CDP mode and will source the current that the device wants.  So if an SDP is connected, the SDP will only draw a max of 500 mA for a USB2.0 device even if the current limit is set to over 1.5A.  There is no difference in the TPS2546.  I was mentioning that some devices such as Apple devices do not detect CDPs.  The TPS2546 has a feature that allows the TPS2546 to operate as a CDP and still allow communications via USB2.0 to such devices.  Section 9.1.2 on page 29 of the TPS2546 datasheet explains this is more detail.

    Thanks,

    Donovan

  • 0 in reply to Donovan Porter
    TI__Intellectual 2980 points
    Hi Donovan,

    Thanks for your answer.

    Regards, H.Inoue