TUSB8041EVM: TUSB8041RGCEVM BOARD RECD 6556574

SRINIVASA MUDIMALA

Prodigy 55 points

Part Number: TUSB8041EVM

I would like to disable the spread spectrum on this board.

As the EEPROM can be programmed using the TI utility over USB.

Could you please mail the utility.

Best,

Srinivas.

over 7 years ago

0 Jorge Llamas (SWAT) over 7 years ago

TI__Expert 7395 points

Hello Srinivas,

I just sent you a friend request; please accept it so I can send it to you through a private message.

Regards,
Jorge

0 Jorge Llamas (SWAT) over 7 years ago in reply to Jorge Llamas (SWAT)

TI__Expert 7395 points

Hello Srinivas,

Please let me know once you have accepted the friendship request, so I can send you the files.
Regards,
Jorge

0 SRINIVASA MUDIMALA over 7 years ago in reply to Jorge Llamas (SWAT)

Prodigy 55 points

Hi ,

I have already accepted the friend request.
Could you please support this with more priority.

Could you check and let me know.

Thanks in advance.

Best,
Srinivas

0 SRINIVASA MUDIMALA over 7 years ago in reply to SRINIVASA MUDIMALA

Prodigy 55 points

Hi

Could you please send the files.

Thanks,
Srinivas.

0 SRINIVASA MUDIMALA over 7 years ago in reply to SRINIVASA MUDIMALA

Prodigy 55 points

Hi ,

Could you please let me know the type of EEPROM that i have to use for this.

Best,
Srinivas.

0 Jorge Llamas (SWAT) over 7 years ago in reply to SRINIVASA MUDIMALA

TI__Expert 7395 points

Hello Srinivas,

Sure. It would work with any I2C EEPROM using a single byte for register/word addressing
Evaluation module is using AT24C04 without issues.

Regards,
Jorge

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Interface

Interface forum

TUSB8041EVM: TUSB8041RGCEVM BOARD RECD 6556574