• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 681 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD13S523: Swap D+ and D-

SimonF
Expert 3050 points
Part Number: TPD13S523

Hi Team,

in the RSV package the routing is not optimal anymore. Is it possible to swap D+ and D- pins to make the routing easier?

Thank you for your time!

Best regards,

Simon

  • 0
    TI__Mastermind 25880 points
    Simon,

    It is possible to swap the D+ and D- pins, but you will have to do it at both the input and output of the device. The reason you have to do this is to prevent channel inversion on the HDMI link.

    I cannot fully tell from you diagram if this will help in the system. I think that it will just push the via from the output to the input, but you can take a look at that option.

    Regards,
    Chuck