This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS2PCIE2212: 4 Lane PCIe Gen 2 Switch

Part Number: TS2PCIE2212
Other Parts Discussed in Thread: HD3SS3412A, HD3SS3411


We are planning to use PCIe FET switch TS2PCIE2212 in one of our new design.

In our use case, 4 lane PCIe Gen 2 signals from PCIe slot shall either be connected to a PCIe device 1 or device 2. Hence, we  will have 1 source and 2 destinations.

Please clarify us the below points:

1. Does the selected switch support required configuration? 

2. How should we terminate source B? Can this be left open(NC)

3. Can we connect CTRL A and CTRL B pins together and provide strapping option through a jumper? 

Please let us know this information at the earliest.

Thanks and Regards