Tool/software: Linux
I need Linux flash burner for TUSB9260
thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello, Roberto
I'm using ARM linux,
and i ported libusb, libhid, TUSB9260_Flash_burner..
below is it's results
-------------
./TUSB9260_FlashBurner -l TUSB926x_Descriptors.desc -f TUSB926x_FW_v1.05.bin
No. TUSB9260 Device
1. VID = 0x0451 / PID = 0x926b hiddev0 Bus/Dev=001/035
Loading Descriptors...
PROGRAMMING............
sh: hdparm: not found
Sending report SetupDownload Data command
Old bootcode version detected. Firmware will be sent using bulk transfers only.
Sending Firmware....
Firmware sent to TUSB926x (001/035) device.
Sending HID Soft-Reset command.
DevDevicesCount : 1
Unable to reset your device using HID commands. Please reset your device manually.
PROGRAMMING SUCCESS!!!!!!
i'm TUSB9260 with no SPI flash,
and this case how can i apply USB mass storage function?
(I want to download firmware to internel RAM in TUSB9260)