This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVPE502: USB3.0 Compliance test

Guru 19475 points
Part Number: SN65LVPE502
Other Parts Discussed in Thread: TUSB522P

About USB3.0 Compliance test for SN65LVPE502, please let me know about two points below condition;

①Should SN65LVPE502 set to Compliance mode for pass the USB3.0 compliance test?

 (Can't Normal mode pass the USB3.0 compliance test?) 

②If ① is yes, is there occur problem by setting Normal mode? 

 (ex. Test is not start, test is start but signal error, etc)

Best regards,

Satoshi