Other Parts Discussed in Thread: ISO7821LL
Hello,
I would like you to confirm about below.
* I would like to make sure detail of Distortion correction function which have ISO7821LLS.
From viewpoint of block diagram, I understood that difference b/w ISO7821LLS and ISO7821LL is below.
- ISO7821LLS have "Distortion Correction" function.
According to datasheet of ISO7821LLS, LVDS input data is NOT output immediately due to this function when this device is changed IDLE to ACTIVE.
On the other hand, ISO7821LL do NOT have "Distortion Correction" function.
So, I understand that LVDS input data will be output immediately even though this device is in IDLE state.
The question is
Could you please tell me why only ISO7821LLS have "Distortion correction" function ?
I understand that LVDS need DC-Balance. So why only LLS have this calibration function.
Best Regards,
