The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 521 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TVP5150: Testing the TVP5150 module

Nandhini Jayapandian
Prodigy 80 points
Part Number: TVP5150

Hello,

I could see that there is no evaluation board or software to process the 8 - bit decoded video data. I am just trying to test it's working by interpreting it's output signals. Can you please advise me on any specific platform that I can use to view the digital signal outputs from TVP5150 on PC? 

Thanks and Regards,

Nandhini Jayapandian

  • 0
    TI__Mastermind 43875 points

    The only real way to look at the data is to have some hardware that can capture the digital data. This data is pushed out at 27MHz so most likely you will need either a logic analyzer or some custom hardware.

    TI used to have a companion EVM that simply re-generated a component video signal from the decoded CVBS but that is no longer available. You could possibly build something similar by connecting to an analog video encoder.

    BR,

    Steve