Can you explain what the flat lines are in the eye diagram attached? (related to a question from Hung)
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I received a little bit more information from the customer this morning and I would like to find out from you what additional information do we need to help solve this issue.
Please let us know if this helps and if there is anything else you need. Thanks,
On a previous message I have attached a diagram of where the customer was measuring the eye diagram like you asked and I added some additional information that they shared. I am asking you if you have any information you can share on how they should perform this test or if they are testing it at the correct location what debugging steps should they try so that they can get a proper measurement.