DP83849IFVS-EVK: no communication

muhammad salahuddin

Part Number: DP83849IFVS-EVK

I can’t communicate with my device through mdio with usb to mdio tool using msp430g . Device is not giving mdc. Only a stable high on the mdc pin. Plz help

over 5 years ago

0 Geet Modi over 5 years ago

TI__Mastermind 26320 points

Hi,

MDC is fed by MSP403G to DP83849 MDC pin. Please check you have correct firmare flashed on msgp430G2.

Regards,
Geet

0 Geet Modi over 5 years ago in reply to Geet Modi

TI__Mastermind 26320 points

Hi,

I am closing this thread. In case issue still persist, please open new thread and provide link to this thread.

Regards,
Geet

0 muhammad salahuddin over 5 years ago in reply to Geet Modi

Prodigy 130 points

Msp430g2 is not detected on my pc repeatedly installed the driver and flash. Even pc is changed. Every time msp430 is connected both lights are stable on. But no mdc and all ports in device manager are showing yellow mark on it except port 3 but it do not connect on port com3. I have been communicating with same pc and same device with same msp430 but suddenly I got the problem. Plz suggest some solutions