TLIN2029-Q1: TLIN2029-Q1 UART issue

Driscoll Tsai

Expert 1590 points

Part Number: TLIN2029-Q1
Other Parts Discussed in Thread: TLIN2029EVM

Hi Sir,

I got TLIN2029EVM, but I want to know what format package of UART will be accept by LIN.

Attached file is communication format.Display - LIN network Software Specification - Rev 1_00.pdf

Regards,

Driscoll

over 6 years ago

0 Eric Hackett over 6 years ago

TI__Guru 70282 points

Driscoll,

Can you elaborate on what you mean by format package of UART? Are you talking about the actual message protocol?

Regards,

0 Miguel Robertson over 6 years ago in reply to Eric Hackett

TI__Guru 62920 points

Hi Driscoll,

Were you able to successfully use the EVM? Just to clarify on your first question, the EVM (and LIN transceiver on it) are just used to convert between logic-level signaling and high-voltage LIN bus signaling, so they do not place restrictions on the data formatting used in an application.

Regards,
Max

Interface

Interface forum

TLIN2029-Q1: TLIN2029-Q1 UART issue