• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 354 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCA6416A: TCA6416A

Yonjgoon Choi
Prodigy 10 points
Part Number: TCA6416A

POR Release time when Power ON

In data sheet, it says Trt (rise rate) is max. 2000ms.

Then TCA6416A supply voltage is from 1.65V ~ 5.5V. Is there any Trt time difference from 1.65V to 5.5V?

I think there should be time difference in below ranges ( in other maker's datasheet, it devided into several Vcc)

1.65 to 1.95

2.3 to 2.7

3.0 to 3.6 => In my circuit.

4.5 to 5.5

  • 0
    TI__Guru 62910 points
    Hi Yongjoon,

    In general the min/max values are limited by the performance at different extremes of the supply voltage range, and so if you are operating in the middle of the range the min/max range could be wider than what is specified. I recommend keeping within the specified range to be safe, though, since we don't have detailed information available for limits at each individual voltage setting.

    Are you having difficulty with the minimum (0.1 ms) or maximum (2000 ms) value?

    Regards,
    Max