LMH0344: Delay time from MUTE deassert to valid SDO and /SDO output

F.N

Part Number: LMH0344

Hi team,

My customer connects /CD and MUTE.
The customer wants to know the delay time from MUTE deassert(from High to Low) to valid SDO and /SDO output.

Please let me know.

Best regards,
Fumio Nakano

over 6 years ago

0 Nasser Mohammadi over 6 years ago

TI__Guru* 93670 points

Hi Fumio-San,

Internal to the device, there is a mux that controls whether incoming data gets outputted or if the data is muted. So the delay is in wire speed and it is under 5nS.

Regards,,,nasser

0 F.N over 6 years ago in reply to Nasser Mohammadi

TI__Expert 8760 points

Hi Nasser-San,

Thank you for your quick reply.
Your answer is very helpful.
Thank you!!

Best regards,
Fumio Nakano

Interface

Interface forum

LMH0344: Delay time from MUTE deassert to valid SDO and /SDO output