SN65DSI85-Q1: two clock signal output of SN65DSI85

ZYT

Part Number: SN65DSI85-Q1
Other Parts Discussed in Thread: SN65DSI85

Hi all,

i used SN65DSI85-Q1 and DS90UB947 in my project.

There are two clock output signals channel A and B of SN65DSI85, but DS90UB947 has only one . How to connect them or any clock output of DS65DSI85 can been connected to DS90UB947 optionally?

over 5 years ago

0 Ikechukwu Anyiam over 5 years ago

TI__Mastermind 35130 points

Hi ZYT,

You would need to the DSI85 in either Single DSI input to Single-Link LVDS, or Dual DSI input to Single-Link LVDS to interface with the DS90UB947. You would use the Channel A LVDS data lanes and clock, and leave Channel B unconnected.

Regards,
I.K.

Interface

Interface forum

SN65DSI85-Q1: two clock signal output of SN65DSI85