• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 446 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0002: LMH0002 DVB-ASI

user5041399
Prodigy 30 points
Part Number: LMH0002


Refer to the Typical Application on the datasheet / SDO (Serial data complement output) side output is BNC connected Although there are devices that can recognize signals and devices that can not be recognized.

/ SDO is negative polarity, DVB-ASI is positive polarity Do I have to be there?

  • 0
    TI__Guru* 93670 points

    Greetings,

    DVB/ASI is polarity sensitive - unlike SDI. If on the system side positive 50-ohm signal goes to SDI+ and negative goes to SDI- then we should use SDO+ on 75-ohm side. So this depends on how system side 50-ohm connection is made.

    Regards,,,nasser