• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 824 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TVP5150AM1: TVP5150AM1-EP desig

Steven He92
Expert 2125 points
Part Number: TVP5150AM1

Dear Sir,

If use s-video to do input signal, output signal is BT656.

May I refer datasheet's application circuit(page-75) to do design, Please you kindly provide suggestion.

Thanks

Steven

  • 0
    TI__Mastermind 43875 points

    To configure for S-Video please refer to section 3.21.1 in the datasheet.

    Register 00h controls the video source type and channel selection.

    For S-video set bit 0 = 1. Bit 1 does not matter when S-video is selected.

    When S-video is selected input 1A = luma and 1B = chroma.

    BR,

    Steve