• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 207 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75189A: 3.3V operation with SN75189A

Jason Haedt
Expert 4090 points
Part Number: SN75189A

Can the 1489As be run off of 3.3V power supply?

The data sheet schematic seems to look like it can but data sheet lists the range as 4.5-5.5V. Ifit can do the input levels trigger levels scale? Output level change?

Thanks for your feedback,

Jason 

  • 0
    TI__Mastermind 25705 points

    Jason,

    The device may still function with 3.3V supply, but some spec will be violated. The input threshold can be adjusted by a resistor and bias voltage on the Response Control pin, which basically change the internal reference voltage of the comparator. The output is close to rail to rail, which is governed by the supply.

    Regards,

    Hao