Other Parts Discussed in Thread: DS125DF111
We set all the jumpers according the description of DS125DF111EVM Evaluation Board User's Guide 5.1.1 but we can not measure any output waveform in OUTB pin when the signal source input the INB pin.
We measure that the voltage of VODB pin is about 100mV with multimeter.Is the voltage normal？The voltage of VIN,VDD,REFCLK_IN is normal and the voltage of OUTB- is 0V.
We suspect the DS125DF111 is not working during the testing process.
We want to know what need be set to Pin Control Mode except the jumpers setting,such as some register of DS125DF111 need to be set or other signal need input the EVM.
Our jumpers setting picture is below:
