Other Parts Discussed in Thread: TUSB564
Hi Team,
I'm wondering why the AUXP/N resistors(R4, R5) are marked as DNP in the TUSB564 EVM schematic while in the TUSB564 datasheet, these resistors are said to be required?
Thanks!
Roy Hsu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I'm wondering why the AUXP/N resistors(R4, R5) are marked as DNP in the TUSB564 EVM schematic while in the TUSB564 datasheet, these resistors are said to be required?
Thanks!
Roy Hsu
Roy
EVM assumes the pullup/pulldown and the AC coupling caps are already inside the DP sink which will be connected to the EVM DP connector.
The datasheet shows the recommended implementation when TUSB564 is designed inside the DP sink.
Thanks
David