Hi,
The default value of Configuration registers is set as INPUT for all of pins.
During power on reset and fix the polarity with I2C, the pins are OPEN. so, should user pull up or pull down to the pins?
Regards,
Nagata.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The default value of Configuration registers is set as INPUT for all of pins.
During power on reset and fix the polarity with I2C, the pins are OPEN. so, should user pull up or pull down to the pins?
Regards,
Nagata.