This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ONET1130EC-EVM: Need ONET1130EC GUI for ONET1130EC-EVM

Part Number: ONET1130EC-EVM
Other Parts Discussed in Thread: USB2ANY, ONET1130EC

Hi experts,

Please share with me ONET1130EC GUI for ONET1130EC-EVM. I have a kit without USB2ANY but with USB dongle which works with ONET1130EC GUI.

There is no any CD with software.

Thanks in advance.

  • Hi Vladimir,

    Please refer to the following link below where we specify how to access ONET1130EC registers:

    http://www.ti.com/lit/ug/snlu245/snlu245.pdf

    Regards,, Nasser

  • Hi Nasser,

    I have sligthly different ONET1130EC EVM which is described in sllu256:

    Im my case EVM has USB dongle connector (it is not the same as USB2ANY connector).

    If you have a look at sllu256 there is ONET1130EC EVM GUI software is described on page 7.

    Can you share it with me?

  • Hi Vladimir,

    We now have a new EVM for the ONET1130EC device. This new EVM uses USB2ANY box(unlike USB dongle that you have).Moving forward, the older EVM with USB dongle is not supported.

    To get the GUI you are looking for, please contact TI sales office and asked them to get in touch with me. I have to send this software since file size is huge.

    There are a couple of other options as well:

    1). Use SDA, SCL, and GND of the USB2ANY box and connect to ONET1130EC EVM. In this case, you can use USB2ANY software - as noted in the latest ONET1130EC EVM - to control the device.

    2). Second option is to use USB2ANY software with your dongle to control ONET1130EC EVM register settings.

    Regards,, Nasser