Is it ok to ground or tie high the NC pins on the part?
We have this set-up ->
pins 8,13,21,22,23,24,49 ground
pin 2 tied to 3.3V
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Is it ok to ground or tie high the NC pins on the part?
We have this set-up ->
pins 8,13,21,22,23,24,49 ground
pin 2 tied to 3.3V
Hi Steve,
I'll need to check and get back to you on this in case these pins are reserved.
Regards,
I.K.
Hi Steve,
We strongly recommend leaving these pins as NC since they are reserved for ATE testing and other functions.
Regards,
I.K.