SN65MLVD040: have problems when using IBIS to simulate differential signals

user6235286

Part Number: SN65MLVD040

Hi,

When using A_B_IO_TYPE of SN65MLVD040 as the output model in hyperlynx, the simulation result is a straight line instead of a response curve. How can I set to obtain correct simulation results?

Kind regards,

Henry

over 4 years ago

0 Ikechukwu Anyiam over 4 years ago

TI__Mastermind 35130 points

Hi Henry,

I am not familiar with hyperlynx, but the simulation looks okay in ADS:

Regards,

I.K.

0 user6235286 over 4 years ago in reply to Ikechukwu Anyiam

Prodigy 20 points

Hi I.K,

Thank you for replying me and i am sorry for not making my question clear enough. When my transmitter and receiver are both A_B_IO_TYPE models of SN65MLVD040, I can`t get an normal response curve. But when I change the receiver into another kind of differential device, I can get a response curve instead of a straight line. So what will happen while replacing C3 with a SN65MLVD040? Will your ADS simulation result still be same?

Kind regards,

Henry

0 Ikechukwu Anyiam over 4 years ago in reply to user6235286

TI__Mastermind 35130 points

Hi Henry,

It looks okay:

Regards,

I.K.

Interface

Interface forum

SN65MLVD040: have problems when using IBIS to simulate differential signals