Page 4 of the Feb 2019 datasheet appears to have an I/O designation error.
Pins 9 & 10 of the SN65LVDT14 part is designated as INPUTS in the table. Shouldn't they be designated as OUTPUTS?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Page 4 of the Feb 2019 datasheet appears to have an I/O designation error.
Pins 9 & 10 of the SN65LVDT14 part is designated as INPUTS in the table. Shouldn't they be designated as OUTPUTS?
Hi Sagar,
You are correct, these pins should be designated as outputs. It states they are outputs in the description but, as you mentioned, the I/O designation is incorrect. It looks like pin 12 is also incorrectly designated as an output when it is the driver input.
Regards,
I.K.