• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 288 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB940-Q1EVM: Ds90ub940-q1evm delivery list

elan peng17
Prodigy 190 points
Part Number: DS90UB940-Q1EVM
Other Parts Discussed in Thread: DS90UB941AS-Q1EVM

We will purchase ds90ub940-q1evm and ds90ub941as-q1evm for early project evaluation. We want to know the following questions in advance:

1. Which kits (such as power supply, FPD link cable, etc.) are included in the ds90ub940-q1evm and ds90ub941as-q1evm we purchased.

2. Is the FPD link interface of ds90ub940-q1evm and ds90ub941as-q1evm matched? We want to use these two boards to connect together for mutual test?

3. What type of wire is used for FPD link interface of ds90ub940-q1evm and ds90ub941as-q1evm?

  • 0
    TI__Mastermind 19720 points

    Hi Elan,

    1. The kits come with just the EVM and a USB cable. You will need a 12V supply to power them and a cable to connect the two.

    2. The FPD-Link output on the 941 and the FPD-Link input on the 940 both are the same connector. 

    3. With our EVM we recommend the following:

    For optimal performance, we recommend Shielded Twisted Pair (STP) 100ohm differential impedance and 24 AWG (or larger diameter) cable for high-speed data applications.

    Leoni Dacar 538 series cable:

    Rosenberger HSD connector:

    Regards,

    Michael W.