• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD62: SYNCOUT Not Used

Kazuki Itoh
Genius 10145 points
Part Number: SN65HVD62

Hi team,

If SYNCOUT is not used, is it recommended to leave it open?

Regards,

Itoh

  • 0
    TI__Guru 62920 points

    Hello Itoh-san,

    Yes, it is OK to leave this pin open if it is not needed in an application.  The recommended pull-up resistance is only needed when the pin is used to signal to some other device since the output stage uses an open-drain structure and an external pull-up is expected to drive the "high" logic level.

    Regards,
    Max