Another instance of the schematic not making the EVM I have. I need the correct schematic.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Another instance of the schematic not making the EVM I have. I need the correct schematic.
Hi Eric,
Is there a revision letter on your EVM? Please accept my friend request so that I can send you the schematic through E2E DM. Please post on your original thread once you have done so.
There is not. The USB3 connector is flat and wide instead of traditional type B. The BOARD_12V jumper is J4 instead of J18 on the available schematic.
Hi Eric,
Please accept my friend request so that I can send you the schematic through E2E DM. Please post on your original thread once you have done so.