SN65MLVD201: About the use of differential transceivers

Annie Liu

Part Number: SN65MLVD201
Other Parts Discussed in Thread: P82B96

Hi Team,

A customer's project needs a two-way io board to board transmission, about 1M speed. Customer would like to know can the differential drive be used like this?

Thanks,

Annie

over 4 years ago

0 Ikechukwu Anyiam over 4 years ago

TI__Mastermind 35130 points

Hi Annie,

I would not recommend shorting the driver input and receiver output together since the stub created and the additional loading from the driver/receiver can cause signal integrity issues.

Regards,

I.K.

0 Annie Liu over 4 years ago in reply to Ikechukwu Anyiam

TI__Genius 10295 points

Hi I.K.

May is know is there no other device that can be used, or can it be faster like the P82B96?

Thanks,

Annie

0 Ikechukwu Anyiam over 4 years ago in reply to Annie Liu

TI__Mastermind 35130 points

Hi Annie,

I don't understand your question about the P82B96, can you rephrase it?

Regards,

I.K.

0 Annie Liu over 4 years ago in reply to Ikechukwu Anyiam

TI__Genius 10295 points

Hi I.K. ,

Customer would like to know if there are other recommended products?

The function is similar to P82B96, but the transmission speed is faster than P82B96. Customer transmitted signals less than 1M, and the transmission distance was about 2 meters.

Thanks,

Annie

0 Ikechukwu Anyiam over 4 years ago in reply to Annie Liu

TI__Mastermind 35130 points

Hi Annie,

Sorry for the delay. All of our MLVDS transceivers will be similar to the MLVD201 in regards to functionality. Namely, it is not recommended to connect the device as you illustrated in your original post.

Regards,

I.K.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

SN65MLVD201: About the use of differential transceivers