DP83TC811EVM: PoE evaluation with PSE and/or PD board

Katsu Matsunaga

Expert 7730 points

Part Number: DP83TC811EVM
Other Parts Discussed in Thread: DP83TC811

Hello,

My customer would like to evaluate the DP83TC811 including PoE.

Is there any way to do it with our evaluation board of PSE and PD?

Do you have any idea for their request?

Best regards, Katsu

over 3 years ago

0 Cecilia Reyes over 3 years ago

TI__Genius 9920 points

Hi Katsu,

We actually have a newly released design on ti.com. Think link is below:

https://www.ti.com/tool/TIDA-010076

This design uses the DP83TC811 and utilizes POE.

Let me know if you have further questions.

Thanks,

Cecilia

0 Katsu Matsunaga over 3 years ago in reply to Cecilia Reyes

TI__Expert 7730 points

Hi Cecilia,

Thank you for your reply.

The design is nice for my customer, but they are in R&D stage. They would like to do evaluation on existing board.

Do you have any idea?

Best regards, Katsu

0 Cecilia Reyes over 3 years ago in reply to Katsu Matsunaga

TI__Genius 9920 points

Hi Katsu,

We do not have an existing board however you may use the design I have linked to you as reference. There should be a user's guide with the detailed design description as well.

Thanks,

Cecilia

0 Katsu Matsunaga over 3 years ago in reply to Cecilia Reyes

TI__Expert 7730 points

Hi Cecilia-san,

Thank you for your support.

Is it possible to buy a board of the design?

the design is daisy-chain connection, do you have a design or board for below configuration?

　　POE--｜　　　　　　　　　　　　　　｜----PD

　　SPE--｜---------------------2Wire----------------｜----SPE

best regards,

Katsu

0 Cecilia Reyes over 3 years ago in reply to Katsu Matsunaga

TI__Genius 9920 points

Hi Katsu,

Unfortunately you cannot purchase the board but you may review the online documents and schematic/layout.

Currently we do not have any SPE POE designs for purchase on the web.

Thanks,

Cecilia

Interface

Interface forum

DP83TC811EVM: PoE evaluation with PSE and/or PD board