Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCA9536: Handling for unused pins

Part Number: PCA9536


Is my understanding correct that the unused pins for P0, P1, P2 and P3 shouldn't be kept floating since each port pin is enabled as an input with high-impedance in the default setting?
If yes, should the pull-down resistors be added to any unused pins?

Best regards,