This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65982: TPS65982 and HD3SS460 wirering

Part Number: TPS65982
Other Parts Discussed in Thread: HD3SS460,


We have a tps65982 connected to HD3SS460 for DP-alt-mode muxing. Can you indicate how to configure the GPIOs in the tps65982 firmware to handle DP-alt-modes C, D, E, F when HD3SS460's EN, AMSEL and POL pins are directly  connected  to tps65982 GPIO 0, GPIO 3 and GPIO 14 without any pull ups or pull downs? SBU is directly managed by the tps65982 and not routed to HD3SS460.

Does the attached setup look correct?