Other Parts Discussed in Thread: DP83TC811EVM, MSP-EXP430F5529LP, UNIFLASH
Hi,
I have issue getting the USB-2-MDIO setup for DP83TC811EVM.
I connect the MicroUSB port on the DP83TC811EVM to a PC USB port.
On the DP83TC811EVM, I follow to the shunt jumper configuration:
- Place shunt across pins 1 and 2 on J23
- Remove shunt from J26
- Place shunt on J25
Then subsequent steps are to flash the MSP430 on DP83TC811EVM.
But I am not sure about the connection of the spy-bi-wire. The J27 described on the DP83TC811EVM User Guide is different from the actual board.
I also not sure about the respective pin to connect to on the MSP-EXP430F5529LP launch pad.
Please help to advice.
Regards,
Teoh