• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 171 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SIGCONARCHITECT: difference between pre-lock output and post-lock output.

Louis Han15
Genius 4680 points
Part Number: SIGCONARCHITECT
Other Parts Discussed in Thread: DS250DF230

Hello

we are using SigCon to test DS250DF230.

What is the difference between pre-lock output and post-lock output in the image below?

we can't find it in the datasheet or programmer guide.

Best regards.

  • 0
    TI__Mastermind 19135 points

    The "pre-lock" outputs pull-down determines the output type for the channel for the case when CDR status is not locked.

    The "post-lock" outputs pull-down determines the output type for the channel for the case when CDR status is locked.

    Cordially,

    Rodrigo Natal

    HSSC Applications Engineer