Hi TI experts,
Like the block below, Is it applicable to two masters and one slave?
If the TCA9543A is not suitable, please recommend possible items.
Thanks.
Downey Kim.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI experts,
Like the block below, Is it applicable to two masters and one slave?
If the TCA9543A is not suitable, please recommend possible items.
Thanks.
Downey Kim.
Hi Downey Kim,
Our I2C switches don't have any kind of master arbitration feature. I don't see this kind of system working without some kind of software set up on both the CPUs.
Any alternative solution I can think of would involve additional software to both CPUs and would involve a normal MUX device with a selector pin.
-Bobby