TCA9517-Q1: DESIGN REVIEW

Melbin Manuel

Intellectual 300 points

Part Number: TCA9517-Q1

Hello,

Kindly review the attached design using TCA9517DGKRQ1
Thanks,

Melbin

TCA9517DGKRQ1_SCH_28DEC2020.pdf

over 3 years ago

0 Melbin Manuel1 over 3 years ago

Prodigy 180 points

Hello,

We are working on a project with TCA9517DGKRQ1 in it.
Kindly review the attached schematics and let me know the review comments.

TCA9517DGKRQ1_SCH_28DEC2020.pdf

0 Danny Bacic over 3 years ago

TI__Mastermind 22635 points

Melbin,

Thanks for reaching out. I did not see any issues with the schematic while looking it over. If there is any concern about high noise or interference levels, you could consider pulling the EN pin high externally if you do not wish to control it. Otherwise, the internal pullup resistor should work fine in this implementation.

Best,

Danny

0 Danny Bacic over 3 years ago

TI__Mastermind 22635 points

Melbin,

I noticed that you have already posted this. In an effort to consolidate posts on E2E, I have merged the threads.

Best,

Danny

Interface

Interface forum

TCA9517-Q1: DESIGN REVIEW