• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 139 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB914A-CXEVM: power supply shorted

nadav aharon
Prodigy 60 points
Part Number: DS90UB914A-CXEVM

hi,

when i plug the DS90UB914A-CXEVM to 5V-0.3A i see that it is shorted 

any idea where to look 

where can be a fuse or a burned component 

it is brand new yesterday  it was working just fine 

  • 0
    TI__Expert 5480 points

    Hello, 

    To determine where the board is damaged, you should begin probing all the components starting from the input power supply and probing the outputs of the step down power converters and follow the traces. The User's guide contains the schematic of the board so you should look at the schematic so you know where to begin probing. Find where there may be a short or open and you can determine what component may have gotten damaged and then you can replace that component and test functionality of your board again.

    Thanks

    Sally